PRECOTE® 19-2

PRECOTE® 19-2

PRECOTE® 19-2 is a nonreactive coating that provides positive locking when no breakaway torque is required. The coating is dry, tack-free, with good adherence and can be used in all kind of assembly procedures. PRECOTE® 19-2 is used as a coating for assembly components e.g., screws and studs in cylindrical/cylindrical pairing, where controlled and high initial installation torque for adjustment is needed. PRECOTE® 19-2 can be used as securing device against the loosening through vibration or for transportation.

 

Advantages
  • Locks immediately after assembly
  • Constant assembly properties
  • Dry to the touch coating
  • Can be applied to metallic and non metallic surfaces
  • Good chemical resistance
  • Limited reusability
  • Non hazardous
Technical Data
  • Color — red / colorless
  • Thread Friction Value > 0.18 – 0.23
  • Temperature Range: -60°C (-75°F) to +90°C (+195°F)
  • Shelf-Life 4 years at max. 30°C and max. 65% relative humidity
Manufacturing Specifications
  • DIN
    • DIN 267 - 28
Downloads

Nylok® Red Patch Torq-Patch®

Nylok® Red Patch Torq-Patch®

NYLOK® Red Patch TORQ-PATCH® is a self-locking element comprised of nylon permanently bonded onto the threads of a fastener. When the NYLOK® Red Patch TORQ-PATCH® is engaged, it creates a wedge between the fastener and mating part compressing the nylon and creating metal to metal contact opposite the patch. This metal to metal contact results in a positive resistance to vibration and loosening. Since nylon has great memory characteristics, this locking element can be reused several times.

Nylok® Powder Coating

Nylok® Powder Coating

Nylok® Powder Coating is Nylon 11 permanently bonded to the metal surface. Nylok® Powder Coating provides superior protection from galvanic corrosion between dissimilar metals, excellent corrosion protection.

3M™ Thread Sealant 4291

3M™ Thread Sealant 4291

3M™ Thread Sealant 4291 is a water-based product designed to be pre-applied to threaded fasteners. It has excellent resistance to automotive fluids and can withstand high temperatures and pressures. Typical applications are threaded fasteners for the engine compartment.

Precote® 5

Precote® 5

Precote® 5 is a nonreactive coating used for immediate sealing of cylindrical and conical threads. The coating is dry, tack-free, with good adherence and can be used in all kinds of assembly procedures.

Precote® 200

Precote® 200

Precote® 200 is a highly resilient under-the-head sealant with good adhesion to seal the mating surfaces of screws, plugs, and rivets. The coating is completely dry and non-tacky. The sealing performance is obtained immediately after assembly.

Nyplas®

Nyplas®

Nyplas® sealant is a plastisol material, pre-applied coating under the heads of a variety of fasteners to provide sealing against water, moisture, dust, air and noise dampening.

Nyseal®

Nyseal®

Nyseal® is a great gasket alternative, creating a gasket-type seal, preventing leakage of fluids and gases under pressure. The coating is permanently fused on the bearing surface of the fastener. As the screw is seated to its final position against the mating part, the Nyseal® element compresses slightly and fills the void between the bearing surface of the head and the counter sink/counter bore.

Nyplate®

Nyplate®

Nyplate® coating is a film-forming dispersion with mineral solid lubricants for coating threaded fasteners requiring a high preload on assembly without galling but after exposure to high temperature permit an easy and non-destructive disassembly.

Nytorq®

Nytorq®

Nytorq® lubricant film-forming synthetic wax lubricant coats threaded fasteners. Nytorq® lubricant reduces friction and prevents cold welding and can be used in a wide variety of industrial and manufacturing applications. It is also specially designed for self-tapping threads. The film is dry-to-touch. Nytorq® lubricant prevents torque chattering and galling and enables high clamp loads in a small deviation.

Pages: 1 2 3